Search across printers, materials, scanners, and accessories.
Top rated products
Vat Sonic Mini 8k/8ks
₪550Vat Sonic Mini 8k/8ks Resin “bath” for Phrozen sonic mini 8k and 8ks printers
Water Washable Resin 2.0 Beige ELEGOO Colored Beige Resin for Water Washing
₪150Water Washable Resin 2.0 Beige Suitable for home use, wash in water, beige color. Can be washed in the sink, no need for alcohol/IPA, less odor when cleaning. XY resolution – approximately 30 microns (8K) Suitable for any printer with a wavelength of 405 nanometers
Water Washable Resin 2.0 Mint green ELEGOO Colored Green Resin for Water Washing
₪150Water Washable Resin 2.0 Mint green Suitable for home use, washable in water, matte green color. Can be washed in the sink, no need for alcohol/IPA, less odor when cleaning. XY resolution – approximately 30 microns (8K) Suitable for any printer with a wavelength of 405 nanometers
Water Washable Resin 2.0 Yellow ELEGOO Colored Yellow Resin for Washing in Water
₪150Water Washable Resin 2.0 Yellow Suitable for home use, washable in water, matte yellow color. Can be washed in the sink, no need for alcohol/IPA, less odor when cleaning. XY resolution – approximately 30 microns (8K) Suitable for any printer with a wavelength of 405 nanometers
White ABS 1.75 mm
₪80White ABS 1.75 mm Material resistant up to 100 degrees, very convenient to finish, hard (less fragile than PLA)
White ASA filament (1.75mm)
₪140ASA White 1.75mm – Strong, sun-resistant material, suitable for outdoor printing and can be smoothed with acetone. The performance of ABS with less odor and less shrinkage.
White PETG – 1 kg 1.75 mm
₪100Polyethylene terephthalate glycol-modified Mechanically strong material, durable up to 80 degrees, a little harder to print than PLA (harder to disassemble supports), harder to finish a product. This material is better known for its use in the beverage bottle industry, due to its toughness and breakability properties (more than PLA or ABS) and its specific gravity is light. This filament is odorless in the work process, due to its strength and stability in the printing process PET-G can be used to build unsupported models, which it is able to handle relatively easily. Printing temperature: 230-250 degrees to the printer head (nozzle) Work surface temperature – 70-85 degrees In addition, the fan must be weakened to 50% or completely turned off in order to prevent clogging of the nozzle (depending on the printer).
White TPU – 1 kg 1.75 mm
₪120TPU – Thermoplastic polyurethane Elastic material (does not stretch, only bends), the easiest to print among the flexible, durable and unbreakable material. Mainly used for drone protectors (end product resistant to blows from a concrete wall at over 200 km/h), gaskets and phone protectors. Printing temperature: 220-230 degrees to the printer head (nozzle) Surface usually does not need to be heated (excellent adhesion to most surfaces)
Yellow ABS 1.75mm
₪80Yellow ABS – 1.75 mm Lightweight, slightly flexible and durable. Excellent for making interlocking parts
Yellow PETG – 1.75mm 1kg
₪100Yellow PETG Polyethylene terephthalate glycol-modified Mechanically strong material, durable up to 80 degrees, a little harder to print than PLA (harder to disassemble supports), harder to finish a product. This material is better known for its use in the beverage bottle industry, due to its toughness and breakability properties (more than PLA or ABS) and its specific gravity is light. This filament is odorless in the work process, due to its strength and stability in the printing process PET-G can be used to build unsupported models, which it is able to handle relatively easily. Printing temperature: 230-250 degrees to the printer head (nozzle) Work surface temperature – 70-85 degrees Additionally, the fan should be turned down to 50% or turned off completely to prevent nozzle clogging (depending on the printer).
Yellow TPU – 1 kg 1.75 mm
₪120TPU – Thermoplastic polyurethane Elastic material (does not stretch, only bends), the easiest to print among the flexible, durable and unbreakable material. Mainly used for drone protectors (end product resistant to blows from a concrete wall at over 200 km/h), gaskets and phone protectors. Printing temperature: 220-230 degrees to the printer head (nozzle) Surface usually does not need to be heated (excellent adhesion to most surfaces)