PLA Matte Gray Pro 1.75mm

PLA Matte Gray Pro 1.75mm Diameter PLA Gray Matte Pro is an easy-to-print material, easy to model (product finishing), hard, not resistant to outdoor conditions (only with sufficiently thick finishing materials), the material is most commonly used for printing because of its ease of printing and price. Corn-based thermoplastic polymer. The most common material in the industry, environmentally friendly and biodegradable. This is the most preferred material, as it allows the user easier machining work. PLA is a hard but fragile material. In outdoor conditions, the corners sometimes warp (depending on the thickness and heat). The additives in PLA PRO or PLA + or Tough PLA are the same, contains additives so that it is 10 degrees more durable and less brittle than normal PLA. As PLA that is more natural or pure and less synthetic is less strong, it can be good for the environment but not in terms of strength. Printing temperature +PLA matte gray: 195-220 degrees to the printer head (nozzle) Work surface temperature – 60 degrees. The working temperature of the nozzle: 210 degrees, when the nozzle is not steel (less thermal conduction), if so 10 degrees more. For a very large product (about 100 hours of printing) it is recommended to add glue and lower the temperature of the bed Fans: 100% Dimensions of the plastic spool for white PLA filament plus: Diameter 200 mm 65 mm deep The weight of the spool is about 160 grams The roll is 1000 grams net (total weight 1.2 kg including the outer carton and spool)