Phrozen Sonic Mega 8KS Set

Phrozen Sonic Mega 8KS Set Notable advantages of the Mega 8KS over the Mega 8K model: Comes with a built-in ACF unlike NFEP, the membrane thickness is twice 300 microns and not 150. There is an ability to put the plate at 45 degrees at the end of printing, in a large printing area, this feature is important to maintain a clean environment with less resin. In addition, saves unnecessary waste of resin. It is possible to combine Pump & Fill, sometimes the print is larger than 1.8 liters and the pump does give an extra liter print. A set that includes: Mega 8KS + Mega Wash + Mega cure S Sonic Mega 8K S System: Phrozen OS Operation: 3.5″ Touch Panel Slicer Software: CHITUBOX V1.9.6 and above (or others) Connectivity: USB Design: Technology Resin 3D Printer – LCD Type Light Source: 405nm ParaLED® Matrix 3.0 Release Film: ACF Film XY Resolution: 43 µm Layer Thickness: 0.01-0.30 mm Average Printing Speed: 600 layers/hr Power Requirement: AC100-240V；50-60Hz System Power: Max 240 W Printer Size: L47.2 x W38 x H56.6 cm Print Volume: L33 x W18.5 x H30 cm Printer Weight: 26 kg It is recommended to purchase additional equipment if there is none, we strongly recommend a device that combines washing with alcohol and UV The warranty is for one year, not including consumables such as FEP, screen and leaks when used incorrectly . The lifespan of a screen is about 2000 working hours when used correctly. (It can be more than 2000 or less, depending on the user) FEP is replaced after loss of elasticity between 3-6 months of continuous use (incorrect use can even be a minute). We guide you on how to take care of it properly in order to keep it for a long time. Phrozen Wash Mega S An excellent washing device suitable for the large dimensions of Mega 8K + Mega8KS. Can be filled with water, alcohol (depending on the printing material). The device has a bottom drain opening which makes it easier to empty the device. Machine Size: L39.5 x W37.5 x H48.6 cm Volume 25 liters Max Curing Size: Ø35 x 30 cm Fan RPM: 1700 rotations/min Curing Time: 1–120 min ( Recommended time: Maximum 30 minutes/cycle) Input Voltage: AC100-240V; 50/60Hz Machine weight: 15 kg Max Power Consumption: 70 W LED Specification: 405 nm Phrozen Cure Mega S Machine Size: L39.5 x W37.5 x H48.6 cm Max Curing Size: Ø35 x 30 cm Fan RPM: 1700 rotations/min Curing Time: 1–120 min ( Recommended time: Maximum 30 minutes/cycle) Input Voltage: AC100-240V; 50/60Hz Machine weight: 15 kg Max Power Consumption: 70 W LED Specification: 405 nm Prominent advantages: UV also from the lower part, that is the UV from 4 directions. Has a very drying function, saves drying under air pressure In conclusion, Sonic Mega 8KS set is a set with a very high cost benefit. You can register In addition, to register for the Facebook group managed by us – For a consultation call: